Member Distributed Generation
It is necessary to contact Oakdale Electric Cooperative first before you start your project to ensure your plans comply and your project goes smoothly.
Todd O'Neil, Director of Energy Services
After contacting Oakdale Electric Cooperative, review the Interconnection Check List (below) to help navigate the interconnection process.
Discuss your project with Oakdale Electric Cooperative employees for general information or specific needs. We applaud our members who are working to conserve energy and who support renewable energy. Contact us to learn more about how we can help.
Step 1: Complete and submit the Wisconsin Public Service Commission Interconnection Application and Interconnection Agreement to Oakdale Electric Cooperative. These documents list the specifications of the equipment to be installed. Your system provider or installer can provide this.
Step 2: Contact Focus on Energy for rebate information.
Step 3: Provide a copy of your liability insurance to Oakdale Electric Cooperative.
Step 4: Oakdale Electric Cooperative will review your plans from your PSC application and notify you of any changes or will approve the project to proceed as planned.
Step 5: Notify Oakdale Electric Cooperative when the system is ready for inspection and interconnection.
Step 6: Oakdale Electric Cooperative performs a field inspection and test of the interconnected system components. Upon passing all tests and inspections, you would be cleared to begin generating energy.
SunnyOak is Oakdale Electric Cooperative's 200kW community solar garden. The solar garden is located south of the Whistling Wings substation on State Road 80 in Necedah, Wisconsin. SunnyOak went into operation in June of 2017 and is built on the same site as the Dairyland Power Cooperative 1.5 Megawatt solar array.
Engie (bought out SoCore) owns and operates the solar garden. Oakdale Electric Cooperative and its wholesale power provider, Dairyland Power Cooperative, purchase the energy output.
This renewable energy project provides clean solar power to help meet the energy demands of Wisconsin and our local co-op membership.
Evergreen is an opportunity for electric cooperative members to voluntarily contribute to the increased use of renewable energy sources. Private ownership of renewable energy does not work for everyone. A member’s property may not support it or the upfront costs and maintenance may be too great. Evergreen is an easy way for Oakdale Electric Cooperative members to do their part and be green.
Evergreen renewable energy comes from wind, sun, hydro and biogas sources. Your participation in Evergreen supports our efforts to increase renewable generation above and beyond any state requirements.
In addition to your normal electric bill, you elect to pay $1 each month per Evergreen block.
In addition to your regular electric bill, you'll pay $1 more for a renewable energy block of 100 kilowatt hours each month (1 cent per kWh). One block of 100 kWh represents about 10% of the average residential monthly electric use (1,000 kWh).
Buy more blocks and do even more to support renewable energy:
Members can choose to have 100 percent of your electricity generated with renewable energy. The average home uses about 1,000 kWh per month, which equals $10 per month to be a green home.
Buy as many Evergreen energy blocks as you like for $1 per month per block.
It's clean! By participating in Evergreen you are investing in the future of the environment. As our dependence on renewable energy sources increases we become less dependent on more conventional power plants that burn fossil fuels such as coal and natural gas.
It's easy! Evergreen doesn’t require any upfront costs for equipment or future maintenance. It provides an option for your home, farm or business to be green without solar panels or wind turbines physically on the property.